The BMP388 sensor is used to detect gas leaks.
Pressure: 2.5 to 2.8 kPa
Flow rate: 50 ml (cc/mim)
This product is set to this condition and detects the sensor and guides the voice to the gas leak.
When the pressure is measured under the above conditions, an inconsistent value is output.
Inputs are constantly changing with each measurement.
-> bmp388.txt : Source of sensor settings and programs.
-> BMP388 board.jpg : This is a picture of the sensor board.
-> bmp388 circuit diagram.PNG
Solved! Go to Solution.
I missed the most basic part Thank you.