10-03-2022 04:17 PM - edited 10-03-2022 04:19 PM
Hi,
i'm developing an air qualiry logger using BME680 and BSEC 1.4.8.0 lite library.
Every 5 minutes the logger collects data from sensor and sends them to a server.
The sensor is configured to work in ULP (with generic_18v_300s_4d configuration) and has iaq/s-iaq/co2eq/breath-voc/gas percentage enabled.
After some days i get following data:
The strange thing is that i get accuracy 3 and reasonable data on 01.10.2022-10:06., after i get samples with accuracy 2 (medium accuracy: auto-trimming ongoing) and "strange" values (at least to me!):
Is this correct? Is normal go back to accuracy 2 for some time with those values?
Thanks,
Alessandro
10-11-2022 11:50 AM
Hi longo92,
When you use these values, it is recommended that you use values with an accuracy of 3.