05-29-2024 11:39 AM
Hello Im trying to operate my BMI160 in lowest power mode possible. For this purpose, Im aiming for AVG number of Averaging cycle to be 128 with ODR of either 0.78125 or 1.5625.
I want to operate my BMI160 (only Accelerometer, with gyro sleeping) around 3-14 micro-Amps. Can anyone tell me what should be the configurations?
I am currently setting ODR as 0x97 for 100 Hz and want to go as low as 0.78125 Hz.[ I2C_Master_WriteReg(SLAVE_ADDR, 0x40, 0x97, 1)]
05-30-2024 04:37 AM
Hi Alex2hsrw,
Thanks for your inquiry.
According your requirement description, the sensor configuration in red below is what you need.
You can configure the BMI160 register value according to the configuration in the table and refer to "2.11 register map".
BMI160 has been discontinued and is not recommended for use in new designs.