Important Announcement: Bosch Sensortec Community is being upgraded! We are currently working on upgrading our community to a new platform. Therefore the Bosch Sensortec Community will be in a read-only-mode until the beginning of November.
04-20-2023 07:57 AM
How to detect CO by BME688? Is there a case for reference？
04-20-2023 04:52 PM
Hi czz,
If you used BME688 dev kit https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bme688-fl001.pdf, you can collect sensor data, import it into BME AI-Studio, create a classification, export the configuration from AI-Studio, and then test your configuration.Reference document: https://www.bosch-sensortec.com/media/boschsensortec/downloads/application_notes_1/bst-bme688-an001....
04-21-2023 08:16 AM
Whether the AI-Studio must be used with the BME board x8?Can AI-Studio support other BME688 boards with I2C/SPI interface?
05-11-2023 07:44 AM
We recommended to use BME688 dev kit to record data and import it to BME AI-Studio.You can also use other hardware to record data and import it to BME AI-Studio, as long as the data format meets the requirements. Refer data format from application note https://www.bosch-sensortec.com/media/boschsensortec/downloads/application_notes_1/bst-bme688-an001....
