How to interface BME680 with PIC32MK1024GPK064 controller?

[ankur]

Hello,

I need to interface BME680 with PIC32MK1024GPK064 but I didn't find the library file for the same.

Below are the software details:

MCU detailed type: PIC32MK1024GPK064 and PIC32MK Curiosity Pro Development Board
IDE version: MPLAB X IDE v5.40
Compiling options: XC32 v2.41

Kindly suggest how can I integrate BME680 with the PIC32MK1024GPK064 controller.

Thank you,

Ankur Patel

[Minhwan]

Hello, 

Unfortunately at this time, this time here is the list of supported architectures. (Oct 2020)

Thanks,

[ankur]

hello,

Thanks for the reply.

I have already referred the details on the website, as you mentioned.

As per my project requirement, I need IAQ, Equivalent CO2, Temperature, Humidity, and Pressure values from the BME680 sensor using a PIC32MK1024GPK064 microcontroller.

Kindly suggest how can I read?

Thank you,

Ankur Patel

[Minhwan]

Hello Ankur, 

You have to use BME680 driver as below url. 

https://github.com/BoschSensortec/BME680_driver

Thanks, 

[ankur]

Hello Minhwan,

Thank you for your reply.

As per the above link, I get temperature, pressure, humidity values.

Still, I am looking for IAQ, b-VOC equivalent, CO2 equivalent values. Kindly suggest how can I get these values using BME680 interfaced with PIC32MK1024GPK064 microcontroller.

If the BSEC library is required to get these values, kindly provide the BSEC library support for the below software details:

MCU detailed type: PIC32MK1024GPK064 and PIC32MK Curiosity Pro Development Board
IDE version: MPLAB X IDE v5.40
Compiling options: XC32 v2.41

Thank you,

Ankur Patel