About BobEChuck

Hi, I am having difficulty getting the BSEC (April release) to  compile with BSEC code.   The compiler output is below and the code is attached.  Your insight would be greatly appreciated. Kind regards, Robert   Arduino: 1.8.13 (Windows 10), Board: "Adafruit Feather HUZZAH ESP8266, 80 MHz, Flash, Disabled (new aborts on oom), Disabled, All SSL ciphers (most compatible), 32KB cache + 32KB IRAM (balanced), Use pgm_read macros for IRAM/PROGMEM, 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, All Flash Contents, 115200" C:\Arduino-1-8-13\arduino-builder -dump-prefs -logger=machine -hardware C:\Arduino-1-8-13\hardware -hardware C:\Users\michm\AppData\Local\Arduino15\packages -tools C:\Arduino-1-8-13\tools-builder -tools C:\Arduino-1-8-13\hardware\tools\avr -tools C:\Users\michm\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino-1-8-13\libraries -libraries C:\Users\michm\Documents\Arduino\libraries -fqbn=esp8266:esp8266:huzzah:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M2M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=all,baud=115200 -vid-pid=1A86_7523 -ide-version=10813 -build-path C:\Users\michm\AppData\Local\Temp\arduino_build_465003 -warnings=none -build-cache C:\Users\michm\AppData\Local\Temp\arduino_cache_582016 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.mklittlefs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino C:\Arduino-1-8-13\arduino-builder -compile -logger=machine -hardware C:\Arduino-1-8-13\hardware -hardware C:\Users\michm\AppData\Local\Arduino15\packages -tools C:\Arduino-1-8-13\tools-builder -tools C:\Arduino-1-8-13\hardware\tools\avr -tools C:\Users\michm\AppData\Local\Arduino15\packages -built-in-libraries C:\Arduino-1-8-13\libraries -libraries C:\Users\michm\Documents\Arduino\libraries -fqbn=esp8266:esp8266:huzzah:xtal=80,vt=flash,exception=disabled,stacksmash=disabled,ssl=all,mmu=3232,non32xfer=fast,eesz=4M2M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=all,baud=115200 -vid-pid=1A86_7523 -ide-version=10813 -build-path C:\Users\michm\AppData\Local\Temp\arduino_build_465003 -warnings=none -build-cache C:\Users\michm\AppData\Local\Temp\arduino_cache_582016 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.mkspiffs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mkspiffs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.python3.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.python3-3.7.2-post1.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\python3\3.7.2-post1 -prefs=runtime.tools.mklittlefs.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.mklittlefs-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\mklittlefs\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -prefs=runtime.tools.xtensa-lx106-elf-gcc-3.0.4-gcc10.3-1757bed.path=C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\3.0.4-gcc10.3-1757bed -verbose C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino Using board 'huzzah' from platform in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2 Using core 'esp8266' from platform in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2 Detecting libraries used... "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for EEPROM.h: [EEPROM@1.0] ResolveLibrary(EEPROM.h) -> candidates: [EEPROM@1.0] "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for Wire.h: [Wire@1.0] ResolveLibrary(Wire.h) -> candidates: [Wire@1.0] "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for SPI.h: [SPI@1.0] ResolveLibrary(SPI.h) -> candidates: [SPI@1.0] "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Alternatives for bsec.h: [BME--1] ResolveLibrary(bsec.h) -> candidates: [BME--1] "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM\\EEPROM.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire\\Wire.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI\\SPI.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bme68x.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec_serialized_configurations_iaq.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1\\bsec_serialized_configurations_selectivity.c" -o nul -DARDUINO_LIB_DISCOVERY_PHASE Generating function prototypes... "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -w -x c++ -E -CC -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE "C:\\Arduino-1-8-13\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\preproc\\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\python3\\3.7.2-post1/python3" -I "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/signing.py" --mode header --publickey "C:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1/public.key" --out "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core/Updater_Signing.h" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_iaq.c.o" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec_serialized_configurations_selectivity.c.o" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-gcc" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -std=gnu17 -Os -g -free -fipa-pta -Wpointer-arith -Wno-implicit-function-declaration -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -falign-functions=4 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bme68x.c.o" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\BME--1.ino.cpp.o" "C:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\3.0.4-gcc10.3-1757bed/bin/xtensa-lx106-elf-g++" -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ -D_GNU_SOURCE "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/lwip2/include" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2/tools/sdk/libc/xtensa-lx106-elf/include" "-IC:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003/core" -c -w -Werror=return-type -Os -g -free -fipa-pta -mlongcalls -mtext-section-literals -fno-rtti -falign-functions=4 -std=gnu++17 -MMD -ffunction-sections -fdata-sections -fno-exceptions -DMMU_IRAM_SIZE=0x8000 -DMMU_ICACHE_SIZE=0x8000 -DNONOSDK22x_190703=1 -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DLWIP_FEATURES=1 -DLWIP_IPV6=0 -DARDUINO=10813 -DARDUINO_ESP8266_ADAFRUIT_HUZZAH -DARDUINO_ARCH_ESP8266 "-DARDUINO_BOARD=\"ESP8266_ADAFRUIT_HUZZAH\"" -DFLASHMODE_QIO -DESP8266 "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\cores\\esp8266" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\variants\\adafruit" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\EEPROM" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\Wire" "-IC:\\Users\\michm\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\3.0.2\\libraries\\SPI" "-IC:\\Users\\michm\\Documents\\Arduino\\libraries\\BME--1" "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp" -o "C:\\Users\\michm\\AppData\\Local\\Temp\\arduino_build_465003\\sketch\\bsec.cpp.o" C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void setup()': BME--1:43:57: error: 'class Bsec' has no member named 'version' 43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix); | ^~~~~~~ BME--1:43:97: error: 'class Bsec' has no member named 'version' 43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix); | ^~~~~~~ BME--1:43:137: error: 'class Bsec' has no member named 'version' 43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix); | ^~~~~~~ BME--1:43:184: error: 'class Bsec' has no member named 'version' 43 | output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix); | ^~~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void loop()': BME--1:76:39: error: 'class Bsec' has no member named 'rawTemperature' 76 | output += ", " + String(iaqSensor.rawTemperature); | ^~~~~~~~~~~~~~ BME--1:77:39: error: 'class Bsec' has no member named 'pressure' 77 | output += ", " + String(iaqSensor.pressure); | ^~~~~~~~ BME--1:78:39: error: 'class Bsec' has no member named 'rawHumidity' 78 | output += ", " + String(iaqSensor.rawHumidity); | ^~~~~~~~~~~ BME--1:79:39: error: 'class Bsec' has no member named 'gasResistance' 79 | output += ", " + String(iaqSensor.gasResistance); | ^~~~~~~~~~~~~ BME--1:80:39: error: 'class Bsec' has no member named 'iaq' 80 | output += ", " + String(iaqSensor.iaq); | ^~~ BME--1:81:39: error: 'class Bsec' has no member named 'iaqAccuracy' 81 | output += ", " + String(iaqSensor.iaqAccuracy); | ^~~~~~~~~~~ BME--1:82:39: error: 'class Bsec' has no member named 'temperature' 82 | output += ", " + String(iaqSensor.temperature); | ^~~~~~~~~~~ BME--1:83:39: error: 'class Bsec' has no member named 'humidity' 83 | output += ", " + String(iaqSensor.humidity); | ^~~~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void checkIaqSensorStatus()': BME--1:94:17: error: 'class Bsec' has no member named 'status' 94 | if (iaqSensor.status != BSEC_OK) { | ^~~~~~ BME--1:95:19: error: 'class Bsec' has no member named 'status' 95 | if (iaqSensor.status < BSEC_OK) { | ^~~~~~ BME--1:96:56: error: 'class Bsec' has no member named 'status' 96 | output = "BSEC error code : " + String(iaqSensor.status); | ^~~~~~ BME--1:101:58: error: 'class Bsec' has no member named 'status' 101 | output = "BSEC warning code : " + String(iaqSensor.status); | ^~~~~~ BME--1:106:17: error: 'class Bsec' has no member named 'bme680Status'; did you mean 'int8_t Bsec::_bme68x_status'? (accessible via 'int8_t Bsec::getBme68xStatus() const') 106 | if (iaqSensor.bme680Status != BME680_OK) { | ^~~~~~~~~~~~ | getBme68xStatus() BME--1:106:33: error: 'BME680_OK' was not declared in this scope; did you mean 'BME68X_OK'? 106 | if (iaqSensor.bme680Status != BME680_OK) { | ^~~~~~~~~ | BME68X_OK BME--1:107:19: error: 'class Bsec' has no member named 'bme680Status'; did you mean 'int8_t Bsec::_bme68x_status'? (accessible via 'int8_t Bsec::getBme68xStatus() const') 107 | if (iaqSensor.bme680Status < BME680_OK) { | ^~~~~~~~~~~~ | getBme68xStatus() BME--1:108:58: error: 'class Bsec' has no member named 'bme680Status'; did you mean '_bme68x_status'? 108 | output = "BME680 error code : " + String(iaqSensor.bme680Status); | ^~~~~~~~~~~~ | _bme68x_status BME--1:108:58: error: 'int8_t Bsec::_bme68x_status' is private within this context In file included from C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:2: C:\Users\michm\AppData\Local\Temp\arduino_build_465003\sketch\bsec.h:294:9: note: declared private here 294 | int8_t _bme68x_status; // Placeholder for the BME68x driver's error codes | ^~~~~~~~~~~~~~ BME--1:113:60: error: 'class Bsec' has no member named 'bme680Status'; did you mean '_bme68x_status'? 113 | output = "BME680 warning code : " + String(iaqSensor.bme680Status); | ^~~~~~~~~~~~ | _bme68x_status BME--1:113:60: error: 'int8_t Bsec::_bme68x_status' is private within this context In file included from C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:2: C:\Users\michm\AppData\Local\Temp\arduino_build_465003\sketch\bsec.h:294:9: note: declared private here 294 | int8_t _bme68x_status; // Placeholder for the BME68x driver's error codes | ^~~~~~~~~~~~~~ BME--1:117:13: error: 'class Bsec' has no member named 'status' 117 | iaqSensor.status = BSEC_OK; | ^~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino: In function 'void updateState()': BME--1:158:19: error: 'class Bsec' has no member named 'iaqAccuracy' 158 | if (iaqSensor.iaqAccuracy >= 3) { | ^~~~~~~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: At global scope: basic_config_state:19:6: error: redefinition of 'void setup()' 19 | void setup(void) | ^~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:36:6: note: 'void setup()' previously defined here 36 | void setup(void) | ^~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: In function 'void setup()': basic_config_state:40:26: error: 'bsec_config_selectivity' was not declared in this scope 40 | !bsecInst.setConfig(bsec_config_selectivity) || | ^~~~~~~~~~~~~~~~~~~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\basic_config_state.ino: At global scope: basic_config_state:50:6: error: redefinition of 'void loop()' 50 | void loop(void) | ^~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:71:6: note: 'void loop()' previously defined here 71 | void loop(void) | ^~~~ basic_config_state:56:6: error: redefinition of 'void errLeds()' 56 | void errLeds(void) | ^~~~~~~ C:\Users\michm\Documents\Arduino\libraries\BME--1\BME--1.ino:120:6: note: 'void errLeds()' previously defined here 120 | void errLeds(void) | ^~~~~~~ Using library EEPROM at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\EEPROM Using library Wire at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\Wire Using library SPI at version 1.0 in folder: C:\Users\michm\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.0.2\libraries\SPI Using library BME--1 in folder: C:\Users\michm\Documents\Arduino\libraries\BME--1 (legacy) exit status 1 'class Bsec' has no member named 'version'   The code...... include <EEPROM.h> #include "bsec.h" /* Configure the BSEC library with information about the sensor 18v/33v = Voltage at Vdd. 1.8V or 3.3V 3s/300s = BSEC operating mode, BSEC_SAMPLE_RATE_LP or BSEC_SAMPLE_RATE_ULP 4d/28d = Operating age of the sensor in days generic_18v_3s_4d generic_18v_3s_28d generic_18v_300s_4d generic_18v_300s_28d generic_33v_3s_4d generic_33v_3s_28d generic_33v_300s_4d generic_33v_300s_28d */ const uint8_t bsec_config_iaq[] = { //#include "config/generic_33v_3s_4d/bsec_iaq.txt" }; #define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // 360 minutes - 4 times a day // Helper functions declarations void checkIaqSensorStatus(void); void errLeds(void); void loadState(void); void updateState(void); // Create an object of the class Bsec Bsec iaqSensor; uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0}; uint16_t stateUpdateCounter = 0; String output; // Entry point for the example void setup(void) { EEPROM.begin(BSEC_MAX_STATE_BLOB_SIZE + 1); // 1st address for the length Serial.begin(115200); Wire.begin(); iaqSensor.begin(BME68X_I2C_ADDR_LOW, Wire); output = "\nBSEC library version " + String(iaqSensor.version.major) + "." + String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) + "." + String(iaqSensor.version.minor_bugfix); Serial.println(output); checkIaqSensorStatus(); iaqSensor.setConfig(bsec_config_iaq); checkIaqSensorStatus(); loadState(); bsec_virtual_sensor_t sensorList[7] = { BSEC_OUTPUT_RAW_TEMPERATURE, BSEC_OUTPUT_RAW_PRESSURE, BSEC_OUTPUT_RAW_HUMIDITY, BSEC_OUTPUT_RAW_GAS, BSEC_OUTPUT_IAQ, BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE, BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY, }; iaqSensor.updateSubscription(sensorList, 7, BSEC_SAMPLE_RATE_LP); checkIaqSensorStatus(); // Print the header output = "Timestamp [ms], raw temperature [°C], pressure [hPa], raw relative humidity [%], gas [Ohm], IAQ, IAQ accuracy, temperature [°C], relative humidity [%]"; Serial.println(output); } // Function that is looped forever void loop(void) { unsigned long time_trigger = millis(); if (iaqSensor.run()) { // If new data is available output = String(time_trigger); output += ", " + String(iaqSensor.rawTemperature); output += ", " + String(iaqSensor.pressure); output += ", " + String(iaqSensor.rawHumidity); output += ", " + String(iaqSensor.gasResistance); output += ", " + String(iaqSensor.iaq); output += ", " + String(iaqSensor.iaqAccuracy); output += ", " + String(iaqSensor.temperature); output += ", " + String(iaqSensor.humidity); Serial.println(output); updateState(); } else { checkIaqSensorStatus(); } } // Helper function definitions void checkIaqSensorStatus(void) { if (iaqSensor.status != BSEC_OK) { if (iaqSensor.status < BSEC_OK) { output = "BSEC error code : " + String(iaqSensor.status); Serial.println(output); for (;;) errLeds(); /* Halt in case of failure */ } else { output = "BSEC warning code : " + String(iaqSensor.status); Serial.println(output); } } if (iaqSensor.bme680Status != BME680_OK) { if (iaqSensor.bme680Status < BME680_OK) { output = "BME680 error code : " + String(iaqSensor.bme680Status); Serial.println(output); for (;;) errLeds(); /* Halt in case of failure */ } else { output = "BME680 warning code : " + String(iaqSensor.bme680Status); Serial.println(output); } } iaqSensor.status = BSEC_OK; } void errLeds(void) { pinMode(LED_BUILTIN, OUTPUT); digitalWrite(LED_BUILTIN, HIGH); delay(100); digitalWrite(LED_BUILTIN, LOW); delay(100); } void loadState(void) { if (EEPROM.read(0) == BSEC_MAX_STATE_BLOB_SIZE) { // Existing state in EEPROM Serial.println("Reading state from EEPROM"); for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) { bsecState[i] = EEPROM.read(i + 1); Serial.println(bsecState[i], HEX); } iaqSensor.setState(bsecState); checkIaqSensorStatus(); } else { // Erase the EEPROM with zeroes Serial.println("Erasing EEPROM"); for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE + 1; i++) EEPROM.write(i, 0); EEPROM.commit(); } } void updateState(void) { bool update = false; /* Set a trigger to save the state. Here, the state is saved every STATE_SAVE_PERIOD with the first state being saved once the algorithm achieves full calibration, i.e. iaqAccuracy = 3 */ if (stateUpdateCounter == 0) { if (iaqSensor.iaqAccuracy >= 3) { update = true; stateUpdateCounter++; } } else { /* Update every STATE_SAVE_PERIOD milliseconds */ if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) { update = true; stateUpdateCounter++; } } if (update) { iaqSensor.getState(bsecState); checkIaqSensorStatus(); Serial.println("Writing state to EEPROM"); for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE ; i++) { EEPROM.write(i + 1, bsecState[i]); Serial.println(bsecState[i], HEX); } EEPROM.write(0, BSEC_MAX_STATE_BLOB_SIZE); EEPROM.commit(); } } ... View more