About marsfan

BSTRobin · ‎03-08-2024

Hi andresUB, BNO055 has been in mass production for many years and has been validated as a mature product on a large number of end products. The I2C of BNO055 BNO055 is not recommended for use in new designs. You can use a combination of BHI360 and BMM350.

Green · ‎01-27-2024

Discovered my school network was blocking the confirmation so I did not get the email. Tried on a different network and it worked perfectly. Thanks.

marsfan · ‎01-25-2024

I figured it out myself. I had mixed up the use of "Ambient Temperature" in the BME68x Driver with the "temp_offset" used in the BSEC library, and was passing a value of 25 into the entire BSEC library, which was being applied as an offset to all of the temperature readings.

marsfan · ‎12-27-2023

Awesome. Thank you.

BSTRobin · ‎12-27-2023

Hi marsfan, When the state is reloaded from flash memory into the system, the timestamp can start from zero. But we recommend using the real-time time of RTC as the time stamp of BSEC, without worrying about whether the current device is powered on or restarted, because even if the system loses power, the RTC time can still be updated normally.

Bosch Shared

About marsfan

Re: BNO055 chip families

Re: BME AI-Studio MacOS Download not working

Re: BSEC Compensated Temperature and Humidity wrong

Re: Understanding BSEC 2 Sample Rates

Re: BSEC Timestamp After State Load

About marsfan

Re: BNO055 chip families

Re: BME AI-Studio MacOS Download not working

Re: BSEC Compensated Temperature and Humidity wrong

Re: Understanding BSEC 2 Sample Rates

Re: BSEC Timestamp After State Load

Still looking for something?