02-26-2024 09:59 AM - edited 02-26-2024 10:04 AM
HI,
I have some questions about the BHI360 chip
1.As far as I know, both the magnetometer calibration algorithm and the heading algorithm are integrated in the firmware library. I use the hardware circuit designed by ourselves. Then how can I brush the firmware library into the BHI360? Or will you provide open source code for us to port?
2.The function of our project is that the sensor placed in the car can obtain the attitude information of the vehicle in real time no matter what area the vehicle is driving to.Can the above functions be achieved with BMM150 + BHI360 without developing any more algorithms
3.Is BHI360 a car scale chip?
02-26-2024 10:20 AM
Hi Migrant_worker,
1: You can migrate BHI360 driver & example code https://github.com/boschsensortec/BHY2_SensorDriver to your project;
2,3: BHI360 is a consumer grade sensor, and we have not tested attitude information on vehicles. You can test it according to your requirements to see if it meets your requirements.
02-27-2024 03:55 AM - edited 02-27-2024 04:00 AM
HI,
Thank you very much for your reply
On which devices have you tested BI360 attitude acquisition?
(BHI360 driver and sample code) Are magnetometer calibration algorithms and attitude Angle algorithms also included in this code package?
02-27-2024 06:28 AM
HI,
Thank you very much for your reply
1.On which devices have you tested BI360 attitude acquisition?
2.Are magnetometer calibration algorithms and attitude Angle algorithms in the BHI360 driver and sample code?
3.I want to get a BHI360 shuttle board for testing, what do I need to do?