03-06-2023 05:26 PM
Hi,
We have a problem when using development kit with the mobile app. The development kit and app has been updated to the latest version.
When we connect the development kit with the mobile app, the app starts running and does these five lines to the gas resistance graph but then it stops running and does not give any results.
How can we get this mobile app working so that it will run all the time and will show us results in real time?
There is a picture as a link to illustrate the problem.
03-07-2023 09:37 AM
Hi UEF,
What are BME688 development kit software and mobile app versions you used?
03-07-2023 10:24 AM
The development kit software is v.2.0.6 and the mobile app version is v1.1.3.
03-08-2023 06:36 AM
Hi UEF,
As you used BME688 dev kit software v2.0.6 and mobile app v1.1.3, you should generate .bmeconfig with BME AI-Studio v2.0.0 and copy it to SD card.
We have generated .bmeconfig with BME AI-Studio v2.0.0, you could copy it to SD card and try it again.
03-08-2023 09:22 AM
And the new application seen in the tutorials can be downloaded?