08-10-2021 02:58 PM - edited 08-10-2021 03:00 PM
I'm building a flight computer for a high power rocket and I need to read at least 11Gs. To achieve that I configured my BNO055 to work at 16G but when I did that my BNO accelaration values became way too inaccurate. It senses up to 0.9 m/s^2 when idle and senses up to 1G when moved just slightly.
On software I first change BNO055's mode to Gyro&Acc mode. Then I write "0x13" to BNO055 ACC Config register. Do I need to do additional things? I don't think it shouldn't go this inaccurate when configured to 16G.
Note: It works fine at 4G configuration. Also I can't use fusion modes, it's not recommended on rockets.
Solved! Go to Solution.
08-11-2021 07:12 AM
Hello Altay,
Did you have log data when you tested it?
08-17-2021 10:29 AM
Hello Altay,
We set ACC range to 16G with BNO055 shuttle board, couldn't reproduce your feedback.
Could you let us know how to reproduce your feedback?
08-19-2021 04:59 AM
Hello Altay,
Could you give feedback?