Microcontroller for application board 3.0

[Newguy]

Currently, I am running C. scripts similar to the one in the provided examples (quaternion or Euler for example). I run all of them by making a C file and using Makefile to make a .exe and run the sensors. I had assumed that everything is uploaded to the application board and it will output its prints through Data I/O pin when the application board is turned on. Is this true or does something need to be done to have the data output through Data I/O pin when the sensor is turned on?

[BSTRobin]

Hi Newguy,

Do you mean you want to run the compiled program to the microcontroller instead of running *.exe?
If yes, you can install Coines software and refer to the document "C:\COINES\v2.8.8\doc\BST-DHW-AN013\pdf".
Run your program to RAM of microcontroller
mingw32-make LOCATION=RAM TARGET=MCU_APP30 download

Run your program to Flash of microcontroller
mingw32-make LOCATION=FLASH TARGET=MCU_APP30 download

[Newguy]

It says the .elf file fail. How do I make it work?

[BSTRobin · Accepted solution]

Hi Newguy,

You can execute this command "mingw32-make LOCATION=FLASH TARGET=MCU_APP30 download" and try it again.