About matteo

matteo

Hi, thank you for your answer. I thought that in the IAQ mode the default 10 step temperature profile was used as well. Now it's clear why only one data is given. Thank you. Best

matteo · ‎08-06-2024

Goodmornig, I was uploading one of my project on a Nicla Sense ME and I got this message: Module: 1 Error Message: Operator new out of memory Location: 0x4ABF5 Error Value: 0x4 Current Thread: main Id: 0x20003168 Entry: 0x1D337 StackSize: 0xC00 StackMem: 0x200067C8 SP: 0x2000732C I never saw this error before during the previous uploads. I then finally sort out that the problem is the new version of the Arduino_BHY2 library (1.0.7) that was released last week. In fact, the problem is solved when I use the version 1.0.6.

BSTRobin · ‎03-19-2024

Hi matteo, After our internal check, we are working on a solution to improve this output and it will be made available as a standard one in the next BSEC release.

Minhwan · ‎08-29-2023

Hi Matteo, BSEC_OUTPUT_GAS_PERCENTAGE is the percentage of filtered gas value. For Air quality monitoring application, I strongly recommend to use BSEC_OUTPUT_IAQ or BSEC_OUTPUT_STATIC_IAQ. Because Bosch Indoor air quality as known as IAQ is based on gas value, so you can provide your or your customer's indoor information to them. It's hard to say about IAQ based on gas percentage. Thank you.

Bosch Shared

About matteo

Re: When BSEC_OUTPUT_RAW_GAS is measured?

Nicla Sense ME: Operator new out of memory with Arduino_BHY2 v1.0.7

Re: BME688 BSEC OUTPUT: datasheet and integration guide

Re: BSEC BME688: BSEC_OUTPUT_GAS_PERCENTAGE

About matteo

Re: When BSEC_OUTPUT_RAW_GAS is measured?

Nicla Sense ME: Operator new out of memory with Arduino_BHY2 v1.0.7

Re: BME688 BSEC OUTPUT: datasheet and integration guide

Re: BSEC BME688: BSEC_OUTPUT_GAS_PERCENTAGE

Still looking for something?