Bosch Sensortec Community

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Welcome to the Bosch Sensortec Community!

    Anonymous
    Not applicable

    This community offers developers the opportunity to discuss and exchange about the sensing solutions by Bosch Sensortec. This community is created by Bosch Sensortec for its customers, partners or other enthusiasts. Therefore, we welcome everyone with an interest in Bosch Sensortec products to join the community, as long as you observe these community rules:

    Be engaged.

    This community is a place for open discussion, sharing thoughts, ideas, knowledge and skills and asking questions. All are welcome and appreciated! Help us to build this community and knowledge source by engaging with other community members. Your participation is essential to help us improve, grow and make this community strong.

    Do not pretend to be someone else: Please do not create fake profiles or impersonate someone else. 

    Respect others

    Respect people's time and attention by asking well-thought-out questions and sharing what you have learned so far in your experimentation or prior research. Respect people as individuals by keeping your tone positive and your comments constructive. Remember that behind each comment there is a real person. Treat others the way that you would like to be treated. Before giving feedback, ask yourself if you would appreciate to receive it. Criticize ideas with the purpose of improvement; do not criticize the people behind it. Always remember to treat others with respect, regardless of race, ethnicity, sexual orientation, political or religious preference, nation or region, gender, physical or medical condition

    Be relevant.

    Make sure your contributions are relevant to the mission of the community, to the specific discussion style and topic where you post. Please do not post duplicate messages in different areas of the community to avoid fragmenting discussion. If you have a new question, start a new thread rather than interrupting a conversation. Solicitations are rarely relevant. If you have something you want members to join, participate in, or buy, ask us first.

    Do not violate Copyright & Confidentiality.

    Remember that you are responsible for all activity associated with your account. Do not post anything that would violate any contractual agreements (copyright, trade secret or otherwise) or nondisclosure agreements to which you are a party  Whenever you share content that belongs to someone else, please ensure that you give the proper credit to the author(s) and that you have the authorization to do so.

     Protect privacy – yours and others'.

    Do not share anything about yourself or your organization that you would not want to see on a roadside billboard. Do not post personal information - your own or anyone else's. This includes contact information or any content that you receive in one-to-one communications without the author's consent.

    Flag inappropriate content for review.

    Do not create or submit explicit content (i.e. restricted, pornography, violence, hate speech, threats, etc.). If you recognize any violation of these guidelines, please notify our Community Managers by choosing "Report Inappropriate Content" from the message's “Options” menu. Please let us know why you feel the content is inappropriate. Our team will evaluate all flagged content or inappropriate behavior and corrective action will be taken. We count on your collaboration to keep our community at its best!

    Spam: Please keep our community a spam-free zone.

    Remember, this is user-generated content.

    You will find plenty of good advice here, but remember that your situation, configuration, or implementation may vary from that of the individual sharing a solution. Some advice you find here may even be wrong. Apply the same good judgment here that you would apply to information anywhere on the Internet.

    Other considerations.

    By using this community, you agree to follow these rules as well as the full Terms of Use for the Bosch Sensortec Community. We thank you, and your fellow community members thank you.

    25 Comments
    elev0083
    New Poster

    I'm looking for a MEMs inertial sensor for a medical application that is not sensitive to resonance caused by external acoustic signals.  Here are a few papers explaining the topic of concern.  Unintended sensor resonance could be problematic in my application.  Can you provide any insight or sensor suggestions?

    https://spqr.eecs.umich.edu/walnut/

    https://www.usenix.org/system/files/conference/usenixsecurity18/sec18-tu.pdf

    DK1
    New Poster

    What is the best replacement option for the BMC150 ?

    o_o
    Contributor

    Closest replacement would be BMA423 + BMM150 connected to the auxialiary interface.

    If you prefer a single package, then BMX160 (although it has an extra gyroscope)

    jsvirzi
    New Poster

    I have an application with 4 BMI085, which I chose because of the ability to "externally" synchronize data. Is this synchronization exclusively with gyroscope on same device?

    All 4 BMI085 will operate with identical settings, and therefore output data rates at 1600Hz. My question is 

    1. can I choose 1 gyroscope to provide synchronization to all 4 accelerometers? It is preferable to have 4 accelerometers with perfectly synchronized data, rather than each accelerometer synchronized to its gyroscope

    Thank you,

    -jsv

    sugandha_daal
    New Poster

    Hi All

    I am using BMP280  Breakout board for my project.

    It is connected with RPI and I am using Android things OS.

    Problem Statement; BMP280 Board giving sensor changed: 181.25519 sensor changed: 180.64856, sensor changed: -135.9237, sensor changed: -133 intermittently.

    Temperature sensor is working but intermittently sensor gives -135.9237, 179.63043, -128.93599, 188.4 values continuously for sometime. After some period of time, it starts giving correct temperature automatically. I do not know the reason. I have to solve this issue. I am new in this. Can anyone help me in this?

    gpechoc
    New Poster

    Please tell me how can I post my question ?

    I don't find no help for that.

     

    Best regards

    Gerald

    User_tech
    New Poster

    Hi all,

    what happens to BMP388 sensor when the NVM storing the calibration data gets corrupted?

    Vindski
    Member

    How do I submit my question, in the question and answers part?
    I find a square for typing the question, but nothing happens. And I dont find any button for submitting.

    NipunD
    New Poster

    Can we use BHI260AB for machine learning purposes to run a trained decision tree model ?

    cch
    New Poster

    Hi,

    I'm using a BMI160 shuttle board with SPI and I get conflicts configuring two interrupts, I placed double tap to INT1 and High-G to INT2. The problem is that the last interrupt to set up seems to break the previous one configuration, see attached code.

    int8_t rslt = BMI160_E_COM_FAIL;
    struct bmi160_int_settg int_config;

    // High-G
    // Interrupt channel and type
    int_config.int_channel = BMI160_INT_CHANNEL_1;
    int_config.int_type = BMI160_ACC_HIGH_G_INT;

    // Interrupt channel/pin settings
    int_config.int_pin_settg.output_en = BMI160_ENABLE; // Output Pin
    int_config.int_pin_settg.output_mode = BMI160_DISABLE; // Push-pull mode
    int_config.int_pin_settg.output_type = BMI160_ENABLE; // Active High
    int_config.int_pin_settg.edge_ctrl = BMI160_ENABLE; // Edge triggered output
    int_config.int_pin_settg.input_en = BMI160_DISABLE; // Disable Pin as input
    int_config.int_pin_settg.latch_dur = BMI160_LATCH_DUR_NONE;
    // High-G interrupt parameters
    int_config.int_type_cfg.acc_high_g_int.high_g_x = BMI160_ENABLE;
    int_config.int_type_cfg.acc_high_g_int.high_g_y = BMI160_ENABLE;
    int_config.int_type_cfg.acc_high_g_int.high_g_z = BMI160_ENABLE;
    int_config.int_type_cfg.acc_high_g_int.high_data_src=BMI160_DISABLE;
    int_config.int_type_cfg.acc_high_g_int.high_thres = 5; // 1 g @ (value * 15.63mg for 4 g range)
    int_config.int_type_cfg.acc_high_g_int.high_dur = 2; // 20 ms [(value + 1) * 2.5ms]
    // Set high-G interrupt
    rslt = bmi160_set_int_config(&int_config, &sensor);

    // Double Tap interrupt
    // Interrupt channel and type
    int_config.int_channel = BMI160_INT_CHANNEL_2;
    int_config.int_type = BMI160_ACC_DOUBLE_TAP_INT;

    // Interrupt channel/pin settings
    int_config.int_pin_settg.output_en = BMI160_ENABLE; // Output Pin
    int_config.int_pin_settg.output_mode = BMI160_DISABLE; // Push-pull mode
    int_config.int_pin_settg.output_type = BMI160_ENABLE; // Active High
    int_config.int_pin_settg.edge_ctrl = BMI160_ENABLE; // Edge triggered output
    int_config.int_pin_settg.input_en = BMI160_DISABLE; // Disable Pin as input
    int_config.int_pin_settg.latch_dur = BMI160_LATCH_DUR_NONE;
    // Double Tap interrupt parameters
    int_config.int_type_cfg.acc_tap_int.tap_en = BMI160_ENABLE;
    int_config.int_type_cfg.acc_tap_int.tap_data_src=BMI160_ENABLE;
    int_config.int_type_cfg.acc_tap_int.tap_dur = 3;
    int_config.int_type_cfg.acc_tap_int.tap_quiet = BMI160_ENABLE;
    int_config.int_type_cfg.acc_tap_int.tap_shock = BMI160_ENABLE;
    int_config.int_type_cfg.acc_tap_int.tap_thr = 3;
    // Set double tap interrupt
    rslt = bmi160_set_int_config(&int_config, &sensor);

    Russell-SIBI
    Member

    Yo! 

    I'm using the BME688 and have 2 test devices. We are trying to detect cigarette smoke with the sensor and have been doing testing in a large room with smoking for 5 minutes and then letting the air return to normal. 

    We have the sensors algorithm saying that the smoke from the cigarettes matches anything from apples and oranges to various other things.

    This testing is for commercial use and we have already order 7000 BME688s for testing and would very much like some more support but there seems to be no more infomation on proper testing and various applications or even how to use the AI Suite in a more indepth fashion.

    Is there anyone we can talk to and what about the advanced user settings? 

    BobEChuck
    New Poster

    Hello,  

    How does one post to this forum?  I have questions about the BME688.  Unable to get it working with BSEC.  Kind Regards,

    Robert

    mac65
    New Poster

    Hi, i am using the Adafruit BME280 Breakout Board.

    I have to place the module in a vertical position instead of horizontally, I wanted to know if I can have problems reading the pressure.

    Thanks in advance for any support.

    mahivarma
    New Poster

    How to ask a question

    barrett357
    New Poster

    BME AI-Studio is installed on Windows 10 but the window is so large I cannot select the button on the lower part of the window. How can I reduce the size? I tried my notebook and 19 inch 5x9 monitor.

    GroceryChennai8
    Occasional Visitor

    I am Swarna from Chennai
    I am doing business in Online Grocery Shopping in Chennai .
    Daily basis i am meeting many product supliers in warehouses.
    I have 10 Ware houses in Chennai installed CCTV Camera installed in entrance.
    Whenever product unloaded by supplier we will track person details.
    For Example)
    One Product has 6 Months Shelf Life  but Sold in 1 Month.
    Supplier will reach us 6 Times.
    Other Product has 6 Months Shelf Life but Sold in 3 Months.
    Supplier will reeach us 2 Times.

    We want to track and reward repeated suppliers .  

    If you have any products to solve this problem , i love to buy that product .
     

    mekkaoui
    New Poster

    Hi All,

    I would like to use the BME AI studio with my custom board. The board contains 1 BME688 and communicates with the PC over a USB VCOM (uart).

    Any help/guidance is most appreciated.

    Best Regards

    pficheux
    New Poster

    Hi all,

    I'm looking for BME AI-Studio for Linux (AI-Studio server) but it's not available anymore from https://www.bosch-sensortec.com/software-tools/software/bme688-software. 

    Is that normal?

    Any advice?

    thx

    Pierre

     

    Ragu
    New Poster

    Hi all,

              I am using BMI270 shuttle board 3.0, in that I am using SPI communication and I can able to read acceleration and gyro values as well as activity and gesture movement features also by using example code in git hub (BMI270-Sensor-API-master). I plan to use no motion interrupt and I need a duration of around 5 minutes. But in the datasheet, the no-motion interrupt range is between 0 to 163 seconds. Now no-motion interrupt works well with 163 seconds. But I need 5 minutes for my application. 

    Is any way to disable and re-enable no-motion interrupt so that I can use some increment counter in the program to make it work?

     I am new to this sensor can you guide me on how to make it work for 5 minutes? Any other ways to make it work for 5 minutes? 

     


    Thanks in advance for any support. Any help would be appreciated. 

    no_motion.png

    with regards,
    P.Ragu.
     
    •  
    akhil01216
    Occasional Visitor

    Hello,

    I tried to install the BME AI-studio server and unfortunately I was not able to complete it. Can anyone help me to install the srever?

    Thank you

    Akhil

    vvs42
    Member

    The example "bme68x_demo_sample" from the latest Bosch-BSEC2-Library 1.5.2400 does not compile.

    Out of RAM: "dram0_0_seg" overflowed by 9256 bytes.

    Each instance is allocated in memory: BSEC_INSTANCE_SIZE 3272

    There are two conflicting defines:

    NUM_OF_SENS 4

    NUM_BME68X_UNITS 8

    How to run this version at least on a standard board with 8 sensors?

    TOTEC
    New Poster
     

    BMP581

    データシート通りではないため、不良ではないか確認したい

    【質問事項】
    データシートのP.9の表に、
    Long term drift Drift during 1year
    ±10Pa(TYP)との記載があります。
    つまり、1年間でおおよそ±10Pa数値が変化するという意味なのですが、実際に

    購入した60個+αのうち30個を【2ヵ月】間動作させたところを
    -15Pa
    ほど変化しております。
    (1年の1/6なのにすでに-15Paも変化している現状)
    それも30個とも綺麗に同じように。
    残りのものも同じような変化をしております。

    この状況が、なぜなのか、
    また、これは解決できる問題なのかどうか知りたい
    (例えば、最初の数日はエイジングする必要があるなど)

    以上、ご協力、よろしくお願いいたします。
    トーテック 井上

    TOTEC
    New Poster

    BMP581

    Since it is not according to the data sheet, I would like to confirm whether it is a defect.

    【Question matters】
    In the table on page 9 of the data sheet,
    There is a description of Long term drift Drift during 1year ±10Pa (TYP).
    In other words, it means that the value changes approximately ±10Pa in one year, but in reality

    I used 30 of the 60+α I purchased for [2 months]
    It has changed by about -15Pa.
    (Even though it's only 1/6 of the year, the current situation has already changed by -15Pa)
    All 30 of them are beautifully the same.
    The rest have undergone similar changes.

    Why is this situation?
    Also, I would like to know if this is a problem that can be solved.
    (e.g. need to be aged for the first few days)

    Thank you very much for your cooperation.
    Totech Inoue

    salmaa
    New Poster

    Hello community,

    I am working on a project using the BME688 sensor and I want to use the BSEC2 library for classification. My problem is that I am not processing the data on the same microcontroller connected to the BME688 due to its limited processing capabilities. Instead, I am trying to implement the BSEC on another microcontroller that will receive data from all the BME sensors. Initially, I tried to test the BSEC on static data to see if it is capable of processing, but the bsec_do_step function has no return. Please help.

    IbtissamELB
    New Poster

    Hello everyone,

    I am dealing with an issue integrating BSEC2 with the BME688.

    I am trying to use the signal processing capabilities of BSEC2 in scan mode for classification, but all the outputs of `bsec_do_steps` are 0.

    Please note that I am using the library separately from the sensor. The sensor has been configured statically, and I am trying to process its outputs separately on another ESP32. Therefore, I am directly using functions from `interface.h` and have eliminated the use of `bsec_control`, as the data is transmitted from another microcontroller (nRF) responsible for data logging.

    Is this approach even possible, or is there an issue with my software?

     

    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist